Monday, February 11, 2013

Jon Parsons’ three-wheeled motorcycle pushes performance boundaries

image host image host
As you can see in the video here, Jon Parsons' three-wheeled motorcycle is an idea that seems to work. Now if only this idea can be grafted on to a ZX-10R Ninja...

Not all of us believe that two wheels are adequate for a motorcycle. Jon Parsons certainly doesn’t. A UK-based chartered engineer who’s currently working as a designer with an aerospace company, Jon set up his own outfit, Dynamic Design Studio, back in 2006 in order to develop an in-line three-wheel motorcycle. “I have been riding motorcycles since I was 16 and have owned mopeds, touring bikes, sportsbikes, trials bikes, motocross bikes, enduro bikes and quads. I ride regularly and enjoy motorcycling in mainland Europe,” he says. We quite liked his 3-wheeled bike – it looks pretty interesting and by at the way it goes (see video above) seems to be quite a capable machine really.

We caught up with Jon for a quick chat to understand a bit more about how and why this 3-wheeled bike exists. Here’s what he had to say:

On how he came up with this idea for building a 3-wheeled motorcycle

Two events triggered me to think about 3x2x2 bikes. The first was while I was watching the first Weston-Super-Mare beach race. The motocross and enduro bikes really struggled to get enough grip to get over the largest dunes. I considered possible solutions like having more tyre contact with the sand to stop the wheel from ‘digging in’ and give the necessary grip. A wider tyre or even two wheels side by side (like a trike) would do this, but the resulting bike would not be able to lean into corners like a conventional bike. The answer appeared to be three wheels in a line and for this to work the wheels would need to be able to move up and down independently, and the rear wheel would need to be driven and steered.

The second event was when I was riding my Kawasaki ZX-9 around a corner in the wet when the front wheel hit a slippery patch, resulting in a slide then grip and the bike highsiding. I reasoned that if the bike had had a third steered wheel, it would still have had some steering, even when the front wheel hit the slippery patch and the rear wheel steering would have reduced the sudden lack of control until the front wheel had cleared the slippery patch.

On the dynamic benefits of having three wheels on a motorcycle

Dynamically, the in-line three wheel bike, with two wheel drive and two wheel steering (3x2x2 layout) has some inherent advantages – the driven middle and rear wheel give exceptional grip, improved acceleration over gravel and slippery surfaces, the additional steering at the rear helps push you around a corner and three wheels in a line reduces pitching moment over rough surfaces giving a smoother ride. Three tyres also help prevent the bike sinking on soft ground or marshy conditions, stopping is more controllable, especially when going down steep hills, with three wheel braking. And finally, the width of the 3x2x2 is narrower than a quad or trike and it can be leaned into corners.

On what’s his opinion of tilting trikes like the Piaggio MP3 and Carver One

I am impressed with the engineering that has gone into the MP3 and Carver where a lot of clever design has been used to make the concepts work and get the bike into production [but] the general problem with motorbikes with side by side wheel layouts, even the tilting versions, is an inherent roll instability caused when one of the front wheels hits a bump causing the bike to roll (tilt) to one side.

On the design and engineering challenges in building a bike with two driven wheels and where the rear wheel also helps with the steering

When I started designing 3x2x2 motorcycles in 1998, I wasn’t sure that it was possible to create a bike with three wheels, with two steered wheels, that would actually work. After all, the dynamics of a bicycle, with the requirement to balance, are more complex than that of car. My initial prototype built in 2007 was designed to prove 3x2x2 principles which it succeeded in doing.

The packaging of the extra parts with allowances for movement was challenging. Space was required for an extra wheel, swinging arm and suspension unit within a motorcycle that is not much longer than a conventional bike. The middle wheel required drive from the engine to it, drive from it to the rear wheel, a swinging arm from the frame to it and a swinging arm from it to the rear wheel.

On having a rear-wheel steering set-up on a motorcycle and how effective it really is

Rear wheel steering used on cars like the Nissan Skyline is more advanced than on my 3x2x2 design as it controlled by an electronic control system and the resultant car proved very effective on the racetrack. Rear wheel steering has been considered by others for use on two wheel bike, but would require a complex control system to make it work. Two wheel steering does work with the 3x2x2 layout, as can be seen in the videos, without having complex control systems.

On production possibilities and interest from mainstream manufacturers

The bike would be relatively straightforward to manufacture. The engine is standard and most of the parts are already designed for mass production. Those that aren’t could be redesigned for production without too much effort. There hasn’t been any interest from mainstream manufacturers, which is not surprising as they have their own future products based on what they know they can sell, sales potential of 3x2x2 bikes is an unknown. The mainstream manufactures would become interested if there was enough public interest.

On what kind of bikes would be best suited for the three-wheeled design

The current design is best suited to off-road and particularly over sand where it has a particular advantage with grip on loose surfaces. It would also be good for adventure bikes again where the extra grip is an advantage, combined with additional weight carrying ability. Ultimately the layout could even be used for sports bikes, where current engine technology can produce more power than a single wheel can handle, particularly in the wet.

On his own favourite bikes and the innovation he’d like to see from mainstream manufacturers

I think Triumph now have a good range and are in touch with their customers. I also like Kawasaki because the company makes good quality bikes and the company has an aerospace division. Mainstream motorcycles are now very well developed and have been well optimised for different types of two wheel motorcycle. I would like to see more radical thinking such as the 3x2x2 layout.

Jon is currently looking for a suitable company that can help him take his 3-wheeled concept to production. He can be reached on

1 comment:

SakeRacer said...

on the first video, the ride (and the bike itself) looks perfect!!!



2WD AC Schnitzer AJS Akrapovic all-wheel-drive Alpinestars AMG Aprilia Ariel Audi Avinton Bajaj Barry Sheene Benelli Bianchi Bimota BMW Bosch Brammo Brembo Britten BSA Buell Bultaco Cagiva Campagna Can-Am Carver Casey Stoner Caterham Chinese bikes Classics Concept Bike Confederate CRandS Custom-built Dainese Derbi Diesel Ducati Eddie Lawson EICMA 2008 EICMA 2009 EICMA 2012 EICMA 2013 EICMA 2014 EICMA 2015 EICMA 2016 Electric Ferrari Fischer flying machines Freddie Spencer Giacomo Agostini Gilera Harley-Davidson Helmets Henderson Hero Motocorp Hesketh Honda Horex Husqvarna Hybrid Hyosung Ilmor Indian Intermot 2012 Intermot 2014 Intermot 2016 Interviews Isle of Man TT Jawa Jay Leno Jeremy Burgess Kawasaki Kevin Schwantz KTM Lamborghini Lambretta Laverda Lazareth Lotus Mahindra Malaguti Markus Hofmann McLaren Mercedes-Benz Mick Doohan Midual Millepercento Mission Motors Mondial Morbidelli Morgan Moriwaki Moto Guzzi Moto Morini Moto2 Moto3 MotoCzysz MotoGP MotoGP-2007 MotoGP-2008 MotoGP-2009 MotoGP-2010 Motorcycle Design Motus MTT MV Agusta MZ News Nissan Norton NSU Peraves Petronas Peugeot Photography Piaggio Porsche Quad Renard Renault Riding Impressions Roehr Ronax Ronin Rotary Royal Enfield Scooters Segway Shootouts Short Films Skills Specials stunt riding Supercharged Suter Suzuki Toyota Travel trike Triumph Turbo TVS Two-stroke Ural V10 V12 V4 V6 V8 Valentino Rossi Velocette Vespa Victory Vincent Volkswagen Voxan Vyrus Wakan Wayne Gardner Wayne Rainey Wunderlich Yamaha Yoshimura Zagato